This command is an optional command to allow for configuration of Bluetooth low energy long term key information. This command must be issued after a Bluetooth device command has been successfully issued (“btdevice”, “ledevice”, “central” or “peripheral”) such that there is at least one valid Bluetooth device address on the automation handler device list. This command cannot be issued in combination with “linkkey” nor “pincode” This command does not require capture hardware to be connected. The command format is:
“longtermkey=<value>”
The value is a valid Bluetooth long term key with leading “0x”, consisting of 32 hexadecimal characters that will result in a 16-byte long term key.
Example – “longtermkey =0x00112233445566778899aabbccddeeff”