This command is an optional command to allow for configuration of Bluetooth Classic link key information. This command must be issued after two Bluetooth device commands have been successfully issued (“btdevice”, “ledevice”, “central” or “peripheral”) such that there are at least two valid Bluetooth device addresses on the automation handler device list. This command cannot be issued in combination with “longtermkey” nor “pincode” This command does not require capture hardware to be connected. The command format is:
“linkkey=<value>”
The value is a valid Bluetooth link key with leading “0x”, consisting of 32 hexadecimal characters that will result in a 16-byte link key.
Example – “linkkey=0x00112233445566778899aabbccddeeff”