This command is an optional command to allow for configuration of options. If not included, the last option selections will be applied. This command does not require capture hardware to be connected. The command format is:
“analyze=inquiryprocess-<value>|pagingnoconn-<value>|nullsandpolls-<value>|emptyle-<value>|anonymousadv-<value>|meshadv-<value>”
The acceptable values are:
-
“on” – Selection checked.
-
“off” – Selection not checked
The parameters are:
Mandatory:
-
inquiryprocess – Control selection of “Analyze Inquiry Process Packets”
-
pagingnoconn – Control selection of “Analyze All Paging Without Connection”
-
nullsandpolls – Control selection of “Analyze NULL and POLL Packets”
-
emptyle – Control selection of “Analyze LE Empty Packets”
-
anonymousadv – Control selection of “Analyze Anonymous/Unknown Adv. Packets”
-
meshadv – Control selection of “Analyze Mesh Advertising Packets”
Optional:
-
lecrcerrors – Control selection of “Analyze LE Packets with CRC Errors”
-
lechannelsounding – Control selection of “Analyze LE Channel Sounding Packets”
The command must be sent with all mandatory parameters.
Example – “analyze=inquiryprocess-off|pagingnoconn-off|nullsandpolls-off|emptyle- on|anonymousadv-on|meshadv-off|lecrcerrors=on”