The Get ComProbe Firmware Information command is sent to the datasource to get the firmware versions of the Sodera, X240, X500, or X700. The command format is:
“Get ComProbe Firmware Information”
Response: “GET COMPROBE FIRMWARE INFORMATION ;<status>[;Reason=<reason>]” where reason will be supplied for SUCCEEDED and FAILED status.
For SUCCEEDED status, reason will be “firmware_status=<firmware status>|firmware_status_description=<firmware status description>|firmware_version=<firmware version>|fpga_version=<FPGA version>|pic_version=<PIC version>”