This command is an optional command to allow for configuration of Bluetooth device information, though it is most often used for Bluetooth low energy devices.
This command will result in the addition of a Bluetooth device address to the datasource device store as well as to the automation handler device list. This command does not require capture hardware to be connected.
The command format is:
“btdevice=<value>, <value>, … <value>”
The values are in the form “<address>[ type=<type>] [irk=<irk>]” where the parameters are:
-
“address” – Device address – must be in the form “0xaabbccddeeff”
-
“type” – Optional type where value of “random” is an indication the address is a low energy random address.
-
“irk” – Valid IRK for the specified address. If this parameter is specified but type is not specified, or type is specified as something other than “random”, the command will be rejected as invalid.
Example – “btdevice=0x001122334455, 0x66778899aabb, 0xc01122334455 type=random”