The table below presents valid personality keys; they are not case-sensitive. These keys will also be referred to as OEM keys. In general, if the hardware specified by the personality key is not present, the automation command that specifies that key, and subsequent datasource commands, will fail.
|
Personality Key |
Description |
|
SODERA |
This mode requires that a Sodera be attached to the host computer. |
|
X240 |
This mode requires that an X240 be attached to the host computer. |
|
X500 |
This mode requires that an X500 be attached to the host computer. |
|
X500e |
This mode requires that an X500e be attached to the host computer. |
|
X700 |
This mode requires that an X700 be attached to the host computer. |
|
DoubleX240 |
This mode requires that two X240s be attached to the host computer. Each X240 should be configured for capture of a different technology. |
|
TripleX240 |
This mode requires that three X240s be attached to the host computer. Each X240 should be configured for capture of a different technology. |
|
VIRTUAL |
This mode launches the analyzer console in the Virtual Sniffing mode. |