This parameter is only for the datasource keys “X500”, or “X700” to specify the Wi-Fi Standard. It is ignored for any other datasource key. It applies only when “channel” or “frequency” are also specified. The command format is:
“standard=<value>”
The acceptable values for the Wi-Fi Standard are:
-
“5” – “Wi-Fi 5 4x4” selected
-
“6” – “Wi-Fi 6E 2x2” selected
-
“7” – “Wi-Fi 7 2x2” selected (X500e only)
“standard” is optional for “X500”, “X500e” and “X700”. When it is absent, “Wi-Fi 5 4x4” will be automatically selected.
Example – “standard=6”
For “X500”, “X500e” or “X700” datasource key, validation of the designated channel or frequency is dependent on the standard designated.