Net Protocol Suite toolbar icons and options.
|
Toolbar |
Icon |
Description |
|
Main Toolbar |
|
Click to hide or display the Menu Bar. |
|
Click to Open a file. |
|
|
Click to Save a trace. |
|
|
Setup Toolbar |
|
Preferences. Click to set the software and display settings. |
|
Analysis Toolbar |
|
Spreadsheet View |
|
Frame Inspector View |
|
|
Traffic Summary |
|
|
Data View |
|
|
Bus Utilization |
|
|
Export to Wireshark. Click to export trace to Wireshark and launch the Wireshark application. Wireshark must be installed on the PC. Wireshark is a free application available at www.wireshark.org. |
|
|
Trace Expert. Click to generate a variety of reports about the loaded Trace. |
|
|
Displays the Trace Information dialog. |
|
|
Navigation Toolbar |
|
Find. You can search for specific Triggers and specify the From, Domain, Direction, and Logic. |
|
Find Next. Searches for the next instance. |
|
|
Find Previous. Searches for the previous instance. |
|
|
Go To. Click the white down arrow to bring up the Event Dialog. Click the small white triangle (on the right side) to bring up the Go To Event dialog. |
|
|
Go to Trigger. Click to go to the trigger point in the trace. |
|
|
Go to Marker. Click the white down arrow and orange pointer to bring up the Marker list dialog. Click the small white triangle (on the right side) to bring up the list of Markers. |
|
|
View Toolbar |
|
Zoom in. Expands the Spreadsheet or Exchange View. |
|
Zoom out. Compresses the Spreadsheet or Exchange View. |
|
|
Click the funnel to Enable Hide/Show. Click the small white triangle to open the filter dialog. |
|
|
Selects a Port. |
|
|
Shows/hides idles in a trace. |
|
|
Analyzer Configuration Settings Icons |
|
Opens the Device Settings dialog. See External Trigger. |
|
Opens the Recording Settings dialog. See Recording Settings Pane. |
|
|
Opens the Trigger Filter Settings dialog. |