LinkExpert provides complete control and management of Teledyne LeCroy's family of protocol analyzer and exerciser hardware while displaying high-level diagnostic information about communication between the root complex (i.e. host systems) and end-points (i.e. devices). The LinkExpert software interface targets design and validation engineers who are responsible for testing and resolving connectivity, interoperability and performance issues as well as ensuring conformance to the design specification. The new interface takes a smart approach to testing Protocols and then displaying the results, including any identified errors, connectivity issues and/or overall performance metrics by using intelligent interpretations of bus traffic, eliminating the need for a deep technical knowledge of the various protocol specifications.
LinkExpert is compatible with the NVMe Conformance tests (Teledyne LeCroy edition) provided by the University of New Hampshire Interoperability Laboratory for official NVMExpress.org testing.
Note: NVMe-MI Tests are Official Conformance tests for NVMExpress.org.
Key Features
-
PCIe Protocol Testing
-
CXL Protocol Testing
-
NVMe Conformance Testing
-
SAS Compliance Testing
-
Ethernet Auto Negotiation and Link Training Testing
This user manual focuses on Ethernet Auto Negotiation and Link Training Testing.
Contact Teledyne LeCroy
|
Send email |
|
|
Contact support |
|
|
Visit Teledyne LeCroy’s website |
|
|
Tell Teledyne LeCroy |
Report a problem to Teledyne LeCroy Support via email by selecting Help > Tell Teledyne LeCroy from the application toolbar. This requires that an email client be installed and configured on the host machine. |