LFPS Settings

Setting

Description

LFPSDutyCycle

LFPS duty cycle flags.

Example: Set LFPSDutyCycle = DC_60_PERCENT

Possible values are:
DC_50_PERCENT = 0 # 50 percent
DC_60_PERCENT = 1 # 60 percent
DC_40_PERCENT = 3 # 40 percent

Default value: DC_50_PERCENT

Applicable Mode: DEVICE, HOST

LFPSPeriod

LFPS period flags.

Example: Set LFPSPeriod = PD_24_NS

Possible values are:
PD_16_NS = 0 # 16 nanoseconds
PD_20_NS = 1 # 20 nanoseconds
PD_24_NS = 2 # 24 nanoseconds
PD_32_NS = 3 # 32 nanoseconds
PD_40_NS = 4 # 40 nanoseconds
PD_48_NS = 5 # 48 nanoseconds
PD_56_NS = 6 # 56 nanoseconds
PD_64_NS = 7 # 64 nanoseconds
PD_72_NS = 8 # 72 nanoseconds
PD_80_NS = 9 # 80 nanoseconds
PD_88_NS = 10 # 88 nanoseconds
PD_96_NS = 11 # 96 nanoseconds
PD_100_NS = 12 # 100 nanoseconds
PD_104_NS = 13 # 104 nanoseconds
PD_112_NS = 14 # 112 nanoseconds
PD_120_NS = 15 # 120 nanoseconds

PD_128_NS = 16 # 128 nanoseconds

PD_136_NS = 17 # 136 nanoseconds

PD_144_NS = 18 # 144 nanoseconds

PD_152_NS = 19 # 152 nanoseconds

PD_160_NS = 20 # 160 nanoseconds

PD_168_NS = 21 # 168 nanoseconds

PD_176_NS = 22 # 176 nanoseconds

PD_184_NS = 23 # 184 nanoseconds

PD_192_NS = 24 # 192 nanoseconds

PD_200_NS = 25 # 200 nanoseconds

Default value: PD_40_NS

Applicable Mode: DEVICE, HOST

LFPSPollingTBurst

Specifies the value of tBurst of Polling.LFPS in nanoseconds.

Note that time value for this setting currently has 8 ns granularity.

Example: Set LFPSPollingTBurst = 64

Possible values are:
number of nanoseconds for tBurst of Polling.LFPS
0xFFFFFFFF # AUTO. Use the spec value.

Default value: AUTO (0xFFFFFFFF)

Applicable Mode: DEVICE, HOST

LFPSPollingTRepeat

Specifies the value of tRepeat of Polling.LFPS in nanoseconds.

Note that time value for this setting currently has 8 ns granularity.

Example: Set LFPSPollingTRepeat = 128

Possible values are:
number of nanoseconds for tRepeat of Polling.LFPS
0xFFFFFFFF # AUTO. Use the spec value.

Default value: AUTO (0xFFFFFFFF)

Applicable Mode: DEVICE, HOST

LFPSPingTBurst

Specifies the value of tBurst of Ping.LFPS in nanoseconds.

Note that time value for this setting currently has 8 ns granularity.

Example: Set LFPSPingTBurst = 256

Possible values are:
number of nanoseconds for tBurst of Ping.LFPS
0xFFFFFFFF # AUTO. Use the spec value.

Default value: AUTO (0xFFFFFFFF)

Applicable Mode: DEVICE, HOST

LFPSPingTRepeat

Specifies the value of tRepeat of Ping.LFPS in nanoseconds.

Note that time value for this setting currently has 8 ns granularity.

Example: Set LFPSPingTRepeat = 4000

Possible values are:
number of nanoseconds for tBurst of Ping.LFPS
0xFFFFFFFF # AUTO. Use the spec value.

Default value: AUTO (0xFFFFFFFF)

Applicable Mode: DEVICE, HOST

LFPSWarmResetTBurst

Specifies the value of tBurst of WarmReset.

Note that time value for this setting currently has 8 ns granularity.

Example: Set LFPSWarmResetTBurst = 625

Possible values are:
number of nanoseconds for tBurst of WarmReset
0xFFFFFFFF # AUTO. Use the spec value.

Default value: AUTO (0xFFFFFFFF)

Applicable Mode: DEVICE, HOST

LFPSU1ExitTBurst

Specifies the value of tBurst of U1 Exit.

Note that time value for this setting currently has 8 ns granularity.

Example: Set LFPSU1ExitTBurst = 8

Possible values are:
number of nanoseconds for tBurst of U1 Exit
0xFFFFFFFF # AUTO. Use the spec value.

Default value: AUTO (0xFFFFFFFF)

Applicable Mode: DEVICE, HOST

LFPSU2ExitTBurst

Specifies the value of tBurst of U2 Exit.

Note that time value for this setting currently has 8 ns granularity.

Example: Set LFPSU2ExitTBurst = 16

Possible values are:
number of nanoseconds for tBurst of U2 Exit
0xFFFFFFFF # AUTO. Use the spec value.

Default value: AUTO (0xFFFFFFFF)

Applicable Mode: DEVICE, HOST

LFPSU3ExitTBurst

Specifies the value of tBurst of U3 Exit.

Note that time value for this setting currently has 8 ns granularity.

Example: Set LFPSU3ExitTBurst = 24

Possible values are:
number of nanoseconds for tBurst of U3 Exit
0xFFFFFFFF # AUTO. Use the spec value.

Default value: AUTO (0xFFFFFFFF)

Applicable Mode: DEVICE, HOST