USB3 Exerciser Manual

_{Manual Version 2.47, For USB Protocol Suite v9.21 and above, October 2023}

Scope of the Document

The document is intended as an extension to Voyager Exerciser language. It addresses only the new elements specific to USB3 Exerciser on top of the language described in
Exerciser Language Manual.

• Introduction

• Global Generation Settings

• Useful Predefined Include Files

• Generation Procedures

• Appendix A - Generation Script Examples

• Appendix B - Raw Register Settings

Document Disclaimer

The information contained in this document has been carefully checked and is believed to be reliable. However, no responsibility can be assumed for inaccuracies that may not have been detected.

Teledyne LeCroy reserves the right to revise the information presented in this document without notice or penalty.

Trademarks and Servicemarks

CATC Trace, Voyager M3i, Voyager M3x, Voyager M310, Voyager M310C, Voyager M310P, Voyager M310e, Voyager M4x, Voyager M480x, Voyager M4120, Voyager ReadyLink, USB Protocol Suite, and BusEngine are trademarks of Teledyne LeCroy, Inc.

All other trademarks are property of their respective companies.

Copyright

Copyright © 2009, Teledyne LeCroy, Inc. All Rights Reserved.

This document may be printed and reproduced without additional permission, but all copies should contain this copyright notice.

Contact Teledyne LeCroy