Link Error Settings

Setting

Description

ErrLostLGOOD

Specifies that the Exerciser does not reply with an LGOODn link command when it receives the next Header Packet (HP).

Example: Set ErrLostLGOOD = 15

Possible values are Disabled (0), number of times (1 to 255), or Infinite (0xFFFFFFFF).

Default value: Disabled (0)

Applicable Mode: HOST, DEVICE

ErrWrongLGOOD

Specifies that the Exerciser replies with a wrong LGOODn link command when it receives the next Header Packet (HP).

Example: Set ErrWrongLGOOD = 15

Possible values are Disabled (0), number of times (1 to 255), or Infinite (0xFFFFFFFF).

Default value: Disabled (0)

Applicable Mode: HOST, DEVICE

ErrLostLCRD

Specifies that the Exerciser does not reply with an LCRDn link command when it receives the next Header Packet (HP).

Example: Set ErrLostLCRD = 15

Possible values are Disabled (0), number of times (1 to 255), or Infinite (0xFFFFFFFF).

Default value: Disabled (0)

Applicable Mode: HOST, DEVICE

ErrWrongLCRD

Specifies that the Exerciser replies with a wrong LCRDn link command when it receives the next Header Packet (HP).

Example: Set ErrWrongLCRD = 15

Possible values are Disabled (0), number of times (1 to 255), or Infinite (0xFFFFFFFF).

Default value: Disabled (0)

Applicable Mode: HOST, DEVICE

ErrCorruptLinkCmd

Specifies that the Exerciser sends Link Commands with wrong
CRC-5.

Example: Set ErrCorruptLinkCmd = 15

Possible values are Disabled (0), number of times (1 to 255), or Infinite (0xFFFFFFFF).

Default value: Disabled (0)

Applicable Mode: HOST, DEVICE

ErrCorruptLinkCmdLCRDOnly

Specifies that the Link Command corruption setting should be applied to LCRD Link Commands only.

Example: Set ErrCorruptLinkCmdLCRDOnly = 1

Possible values: 0 or 1

Default value: 0

Applicable Mode: HOST, DEVICE

ErrCorruptLMP

Specifies that the Exerciser sends Link Management Packets (LMP) Commands with wrong CRC-16.

Example: Set ErrCorruptLMP = 15

Possible values are Disabled (0), number of times (1 to 255), or Infinite (0xFFFFFFFF).

Default value: Disabled (0)

Applicable Mode: HOST, DEVICE

ErrCorruptLMPCRC5

Specifies that LMP packets sent by the Exerciser should include a wrong CRC5 value. The number of times to apply this error is specified by the CRC5ErrRtryCnt Setting.

Example: Set ErrCorruptLMPCRC5 = 1

Possible values: 0 or 1

Default value: 0

Applicable Mode: HOST, DEVICE

ErrCorruptLMPCRC16

Specifies that LMP packets sent by the Exerciser should include a wrong CRC16 value. The number of times to apply this error is specified by the CRC16ErrRtryCnt Setting.

Example: Set ErrCorruptLMPCRC16 = 1

Possible values: 0 or 1

Default value: 0

Applicable Mode: HOST, DEVICE

ErrCorruptLMPHSN

Specifies that LMP packets sent by the Exerciser should include a wrong Header Sequence Number value. The number of times to apply this error is specified by the HSNErrRtryCnt Setting.

Example: Set ErrCorruptLMPHSN = 1

Possible values: 0 or 1

Default value: 0

Applicable Mode: HOST, DEVICE

ErrCorruptLMPNoCap

Specifies that the Exerciser should not send the LMP Capability packet during link initialization.

Example: Set ErrCorruptLMPNoCap = 1

Possible values: 0 or 1

Default value: 0

Applicable Mode: HOST, DEVICE

ErrCorruptLMPNoCfg

Specifies that the Exerciser should not send the LMP Configuration Request (HOST mode) or LMP Configuration Response (DEVICE mode) packet during link initialization.

Example: Set ErrCorruptLMPNoCfg = 1

Possible values: 0 or 1

Default value: 0

Applicable Mode: HOST, DEVICE

ErrDisparity

Specifies that the Exerciserinserts valid 10-bit symbols with incorrect running disparity in the outgoing traffic. It randomly inserts them in the transmitting stream of data, regardless of the contents of the traffic.

Example: Set ErrDisparity = 15

Possible values are Disabled (0), number of times (1 to 255), or Infinite (0xFFFFFFFF).

Default value: Disabled (0)

Applicable Mode: HOST, DEVICE

ErrWrongSymbol

Specifies that the Exerciserinserts invalid 10-bit symbols in the outgoing traffic. It randomly inserts them in the transmitting stream of data, regardless of the contents of the traffic.

Example: Set ErrWrongSymbol = 15

Possible values are Disabled (0), number of times (1 to 255), or Infinite (0xFFFFFFFF).

Default value: Disabled (0)

Applicable Mode: HOST, DEVICE

ErrLBAD

Specifies that the Exercisersends LBAD LC instead of LGOODn upon receiving correct header packets.

Example: Set ErrLBAD = 15

Possible values are Disabled (0), number of times (1 to 255), or Infinite (0xFFFFFFFF).

Default value: Disabled (0)

Applicable Mode: HOST, DEVICE