Link Delay Settings

Setting

Description

DelayLGOOD

Allows adding a specific delay to the response time of LGOODn.

Note that the requested time is added to the normal (minimum) response time of the system. This is approximately 500ns at SS 5Gbps rate, and 1500ns at SS+ 10Gbps rate.

Also note that time delay currently has 100 ns granularity.

Example: Set DelayLGOOD = 200

Possible values are:
delay in nanoseconds # delay to add.
0 # no delay

Default value: 0

Applicable Mode: DEVICE, HOST

DelayLGOODCnt

Specifies number of times to add DelayLGOOD.

Example: Set DelayLGOODCnt = 4

Possible values are:
positive integer # number of times to apply.
0 # no adding
0xFFFFFFFF # Apply this setting an infinite number of times.

Default value: 0

Applicable Mode: DEVICE, HOST

DelayLBAD

Allows adding a specific delay to the response time of LBADn.

Note that the requested time is added to the normal (minimum) response time of the system.

Also note that time delay currently has 100 ns granularity.

Example: Set DelayLBAD = 300

Possible values are:
delay in nanoseconds # delay to add.
0 # no delay

Default value: 0

Applicable Mode: DEVICE, HOST

DelayLBADCnt

Specifies number of times to add DelayLBAD.

Example: Set DelayLBADCnt = 7

Possible values are:
positive integer # number of times to apply.
0 # no adding
0xFFFFFFFF # Apply this setting an infinite number of times.

Default value: 0

Applicable Mode: DEVICE, HOST

DelayLCRD

Allows adding a specific delay to the response time of LCRDn.

Note that the requested time is added to the normal (minimum) response time of the system.

Also note that time delay currently has 100 ns granularity.

Example: Set DelayLCRD = 100

Possible values are:
delay in nanoseconds # delay to add.
0 # no delay

Default value: 0

Applicable Mode: DEVICE, HOST

DelayLCRDCnt

Specifies number of times to add DelayLCRD.

Example: Set DelayLCRDCnt = 4

Possible values are:
positive integer # number of times to apply.
0 # no adding
0xFFFFFFFF # Apply this setting an infinite number of times.

Default value: 0

Applicable Mode: DEVICE, HOST