Device Mode Settings

Setting

Description

Mode

Specifies the mode that the Exerciser uses when it performs link management and high-level traffic management.

For link-layer-level mode, “Host” means that the Exerciser port is set as “upstream” port and link direction is “downstream”.
“Device” means that the Exerciser port is set as “downstream” port and link direction is “upstream”.

The Exerciser must perform all actions for each direction, as the USB 3.2 specification requires.

Example: Set Mode = HOST (0)

Possible values are 0 = HOST or 1 = DEVICE.

Default value: Use Recording Options if not specified.

UseMMCXConnectors

Specifies whether the Exerciser uses MMCX connectors or regular USB 3.2 connectors.

Example: Set UseMMCXConnectors = 1

Possible values are:
0 # Use regular USB 3.2 connectors.
1 # Use MMCX connectors,

Default value: 0 (Use regular USB 3.2 connectors.)